/**/
ESP32 Pinout and First Impression, Development Board Reviewed by Momizat on . ESP32 The Next Big things in IOT World. After Grand Success of ESP8266, espressif has lunched esp32. Power Optimized wifi and Bluetooth Low Energy embedded into ESP32 The Next Big things in IOT World. After Grand Success of ESP8266, espressif has lunched esp32. Power Optimized wifi and Bluetooth Low Energy embedded into Rating: 0
You Are Here: Home » IOT » ESP32 Pinout and First Impression, Development Board

ESP32 Pinout and First Impression, Development Board






ESP32 The Next Big things in IOT World.

After Grand Success of ESP8266, espressif has lunched esp32. Power Optimized wifi and Bluetooth Low Energy embedded into a single chip.

Some Of the technical information about the esp8266 is described in the Table Below.

Technical Specification

Key Features 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPSIntegrated 520 KB SRAM

Integrated 802.11BGN HT40 Wi-Fi transceiver, baseband, stack and LWIP

Integrated dual mode Bluetooth (classic and BLE)

16 MByte flash

2.2V to 3.6V operating voltage

-40¬įC to +125¬įC operating temperature

On-board PCB antenna / IPEX connector for external antenna

 

Sensors Ultra-low noise analog amplifier

Hall sensor

10x capacitive touch interface

32 kHz crystal oscillator

 

32x GPIO 3 x UARTs, including hardware flow control

3 x SPI

2 x I2S

12 x ADC input channels

2 x DAC

2 x I2C

PWM/timer input/output available on every GPIO pin

OpenOCD debug interface with 32 kB TRAX buffer

SDIO master/slave 50 MHz

Supports external SPI flash up to 16 MB

SD-card interface support

 

Security Related WEP, WPA/WPA2 PSK/Enterprise

Hardware accelerated encryption: AES / SHA2 / Elliptical Curve Cryptography / RSA-4096

 

Performance Supports sniffer, station, softAP and Wi-Fi direct modes

Max data rate of 150 [email protected] HT40, 72 [email protected] HT20, 54 [email protected], and 11 [email protected]

Maximum transmit power of 19.5 [email protected], 16.5 [email protected], 15.5 [email protected]

Minimum receiver sensitivity of -98 dBm

135 Mbps UDP sustained throughput

2.5 őľA deep sleep current

 

Pin outs Of ESP32 Different Form Factor:

  1. ESP32 ic pinout

esp32 pinout

2. ESP32 breakout board pinout

esp32 module pinout

Breakout and Development Board:

Companies like sparkfun and few other companies already started making development board like Nodemcu.

esp32-pinout-sparkfun-thing-board-my-electronics-lab-1 esp32-pinout-sparkfun-thing-board-my-electronics-lab

 

All Documents About ESP32 Can be downloaded From Here:

Download ESP32 Datasheet

 

ESP32 Official Forum Can also be found Here:

ESP32 Forum

Official Arduino SDK for ESP32 can be find here:

Arduino SDK

 

Conclusion:

It seems like company took esp8266 seriously looking at demand on this IOT edge, and they are really dedicated for their work. Combination of Both BLE and Wifi can be a great feature for cool Projects on IOT. We will also share different projects on ESP32 in near future. Hope You find this article useful. Do let us know, what you think about ESP8266 adn ESP32 and its future.

 




About The Author

I am a maker, who loves to think, hack and build new electronics stuff, I always find time to document , share my knowledge with others. I am graduate in BTech(Electronics and Communication Engineering).

Number of Entries : 36
Scroll to top